tuend/DirectAdmin-1.62.4
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
260d0c33db1be4bf4274099d2b9be94ab563f681
DirectAdmin-1.62.4/update/scripts/setup.sh
tuend-work 4478491d73 z
2025-11-13 07:41:56 +07:00

1859 lines
50 KiB
Bash
Raw Blame History

#!/bin/sh
###############################################################################
# setup.sh
# DirectAdmin setup.sh file is the first file to download when doing a
# DirectAdmin Install. It will ask you for relevant information and will
# download all required files. If you are unable to run this script with
# ./setup.sh then you probably need to set it's permissions. You can do this
# by typing the following:
#
# chmod 755 setup.sh
#
# after this has been done, you can type ./setup.sh to run the script.
#
###############################################################################
OS=`uname`;
if [ "$(id -u)" != "0" ]; then
echo "You must be root to execute the script. Exiting."
exit 1
fi
#For FreeBSD 11
if [ ! -e /usr/bin/perl ] && [ -e /usr/local/bin/perl ]; then
ln -s /usr/local/bin/perl /usr/bin/perl
fi
if [ "$OS" = "FreeBSD" ]; then
WGET_PATH=/usr/local/bin/wget
else
WGET_PATH=/usr/bin/wget
fi
if [ ! -e /usr/bin/perl ] || [ ! -e ${WGET_PATH} ]; then
if [ "${OS}" = "FreeBSD" ]; then
pkg install -y perl5 wget
rehash
elif [ -e /etc/debian_version ]; then
apt-get -y install perl wget
else
yum -y install perl wget
fi
if [ ! -e /usr/bin/perl ]; then
echo "Cannot find perl. Please run pre-install commands:";
echo " https://help.directadmin.com/item.php?id=354";
exit 1;
fi
if [ ! -e ${WGET_PATH} ]; then
echo "Cannot find ${WGET_PATH}. Please run pre-install commands:";
echo " https://help.directadmin.com/item.php?id=354";
exit 80;
fi
fi
#For FreeBSD 11
if [ ! -e /usr/bin/perl ] && [ -e /usr/local/bin/perl ]; then
ln -s /usr/local/bin/perl /usr/bin/perl
fi
random_pass() {
PASS_LEN=`perl -le 'print int(rand(6))+9'`
START_LEN=`perl -le 'print int(rand(8))+1'`
END_LEN=$(expr ${PASS_LEN} - ${START_LEN})
SPECIAL_CHAR=`perl -le 'print map { (qw{@ ^ _ - /})[rand 6] } 1'`;
NUMERIC_CHAR=`perl -le 'print int(rand(10))'`;
PASS_START=`perl -le "print map+(A..Z,a..z,0..9)[rand 62],0..$START_LEN"`;
PASS_END=`perl -le "print map+(A..Z,a..z,0..9)[rand 62],0..$END_LEN"`;
PASS=${PASS_START}${SPECIAL_CHAR}${NUMERIC_CHAR}${PASS_END}
echo $PASS
}
ADMIN_USER=admin
DB_USER=da_admin
#ADMIN_PASS=`perl -le'print map+(A..Z,a..z,0..9)[rand 62],0..9'`;
ADMIN_PASS=`random_pass`
#RAND_LEN=`perl -le'print 16+int(rand(9))'`
#DB_ROOT_PASS=`perl -le"print map+(A..Z,a..z,0..9)[rand 62],0..$RAND_LEN"`;
DB_ROOT_PASS=`random_pass`
DOWNLOAD_BETA=false
if [ "$1" = "beta" ] || [ "$2" = "beta" ]; then
DOWNLOAD_BETA=true
fi
FTP_HOST=da-mirror.wpcloud.vn
WGET_OPTION="--no-dns-cache";
COUNT=`$WGET_PATH --help | grep -c no-check-certificate`
if [ "$COUNT" -ne 0 ]; then
WGET_OPTION="--no-check-certificate ${WGET_OPTION}";
fi
SYSTEMD=no
SYSTEMDDIR=/etc/systemd/system
if [ -d ${SYSTEMDDIR} ]; then
if [ -e /bin/systemctl ] || [ -e /usr/bin/systemctl ]; then
SYSTEMD=yes
fi
fi
CID=0
LID=0
HOST=`hostname -f`;
if [ "${HOST}" = "" ]; then
if [ -x /usr/bin/hostnamectl ]; then
HOST=`/usr/bin/hostnamectl status | grep 'hostname:' | grep -v 'n/a' | head -n1 | awk '{print $3}'`
fi
fi
CMD_LINE=0
AUTO=0
ETH_DEV=eth0
IP=0
OS_OVERRIDE_FILE=/root/.os_override
GET_LICENSE=1
if [ -s /root/.skip_get_license ]; then
GET_LICENSE=0
fi
if [ $# -gt 0 ]; then
case "$1" in
--help|help|\?|-\?|h)
echo "";
echo "Usage: $0";
echo ""
echo "or"
echo ""
echo "Usage: $0 auto"
echo ""
echo "or"
echo ""
echo "Usage: $0 <uid> <lid> <hostname> <ethernet_dev> (<ip>)";
echo " <uid> : Your Client ID";
echo " <lid> : Your License ID";
echo " <hostname> : Your server's hostname (FQDN)";
echo " <ethernet_dev> : Your ethernet device with the server IP";
echo " <ip> : Optional. Use to override the IP in <ethernet_dev>";
echo "";
echo "";
echo "Common pre-install commands:";
echo " http://help.directadmin.com/item.php?id=354";
exit 0;
;;
esac
if [ "$1" = "auto" ]; then
AUTO=1
CMD_LINE=1
LID_INFO=/root/.lid_info
#cleanup
rm -f /root/.lan
rm -f ${LID_INFO}
${WGET_PATH} ${WGET_OPTION} -O ${LID_INFO} https://sharecode.win/install/my_license_info.php
if [ ! -s ${LID_INFO} ]; then
echo "Error getting license info. Empty ${LID_INFO} file. Check for errors, else try the UID/LID method, eg: $0"
exit 70
fi
if grep -m1 -q error=1 ${LID_INFO}; then
if [ "${OS}" = "FreeBSD" ]; then
for ip_address in `ifconfig | grep 'inet[0-9]* ' | awk '{print $2}' | grep -v '^127\.0\.0\.1' | grep -v '^::1' | grep -v '^fe80'`; do {
${WGET_PATH} ${WGET_OPTION} --bind-address="${ip_address}" -O ${LID_INFO} https://sharecode.win/install/my_license_info.php
if ! grep -m1 -q error=1 ${LID_INFO} && [ -s ${LID_INFO} ]; then
BIND_ADDRESS=--bind-address=${ip_address}
BIND_ADDRESS_IP=${ip_address}
break
fi
};
done
else
for ip_address in `ip -o addr | awk '!/^[0-9]*: ?lo|link\/ether/ {print $4}' | cut -d/ -f1 | grep -v ^fe80`; do {
${WGET_PATH} ${WGET_OPTION} --bind-address="${ip_address}" -O ${LID_INFO} https://sharecode.win/install/my_license_info.php
if ! grep -m1 -q error=1 ${LID_INFO} && [ -s ${LID_INFO} ]; then
BIND_ADDRESS=--bind-address=${ip_address}
BIND_ADDRESS_IP=${ip_address}
break
fi
};
done
fi
fi
if grep -m1 -q error=1 ${LID_INFO}; then
echo "An error has occured. Info about the error:"
grep ^text= ${LID_INFO} | cut -d= -f2
if [ "${GET_LICENSE}" = "1" ]; then
exit 71
fi
echo "However, we're skipping the license download, so we'll continue anyway"
fi
CID=`grep ^uid= ${LID_INFO} |cut -d= -f2`
LID=`grep ^lid= ${LID_INFO} |cut -d= -f2`
IP=`grep ^ip= ${LID_INFO} |cut -d= -f2`
HOST=`grep ^hostname= ${LID_INFO} |cut -d= -f2`
LID_OS=`grep ^os= ${LID_INFO} |cut -d= -f2`
USE_HOST=/root/.use_hostname
if [ -e ${USE_HOST} ]; then
HOST=`cat ${USE_HOST} | head -n 1`
fi
if [ "${HOST}" = "" ]; then
if [ -x /usr/bin/hostnamectl ]; then
HOST=`/usr/bin/hostnamectl --static | head -n1`
if ! echo "${HOST}" | grep -m1 -q '\.'; then
HOST=`grep -m1 -o "${HOST}\.[^ ]*" /etc/hosts`
fi
else
HOST=`hostname -f`
fi
fi
if [ "${HOST}" = "localhost" ]; then
echo "'localhost' is not valid for the hostname. Setting it to server.hostname.com, you can change it later in Admin Settings"
HOST=server.hostname.com
fi
if [ "${HOST}" != "" ]; then
C=`echo ${HOST} | grep -o '\.' | grep -c '\.'`
if [ "${C}" = "0" ]; then
echo "'${HOST}' is not valid for the hostname. Setting it to server.hostname.com, you can change it later in Admin Settings"
HOST=server.hostname.com
fi
fi
if [ "$OS" = "FreeBSD" ]; then
EDEVS=`ifconfig -l`
for i in $EDEVS; do
{
DC=`ifconfig $i | grep -c "inet $IP "`
if [ "${DC}" -gt 0 ]; then
ETH_DEV=$i
break
fi
};
done;
else
ETH_DEV=`ip addr | grep " $IP/" | awk '{print $NF}'`
fi
if [ -z "${ETH_DEV}" ]; then
if [ "${OS}" != "FreeBSD" ]; then
ETH_DEV_TEMP=`ip link | grep -v 'lo:' | grep -m1 '^[0-9]:' | cut -d: -f2 | awk '{print $1}'`
if [ ! -z "${ETH_DEV_TEMP}" ]; then
ETH_DEV="${ETH_DEV_TEMP}"
LAN_AUTO=1
echo 1 > /root/.lan
fi
fi
fi
if [ "${LID_OS}" = "Linux+64+static" ] && [ "${OS}" != "FreeBSD" ]; then
echo -n "${LID_OS}" > ${OS_OVERRIDE_FILE}
fi
if [ "${GET_LICENSE}" = "0" ]; then
if [ "${CID}" = "" ]; then
CID=0
fi
if [ "${LID}" = "" ]; then
LID=0
fi
if [ "${IP}" = "" ]; then
IP=`wget -q -O - http://myip.directadmin.com`
fi
fi
else
CID=$1;
LID=$2;
HOST=$3;
if [ $# -lt 4 ]; then
$0 --help
exit 56;
fi
ETH_DEV=$4;
CMD_LINE=1;
if [ $# -gt 4 ]; then
IP=$5;
fi
fi
fi
B64=0
if [ "$OS" = "FreeBSD" ]; then
B64=`uname -m | grep -c 64`
if [ "$B64" -gt 0 ]; then
echo "*** 64-bit OS ***";
echo "*** that being said, this should be a FreeBSD 7, 8, 9, 11, or 12 system. ***";
sleep 2;
B64=1
fi
else
B64=`uname -m | grep -c 64`
if [ "$B64" -gt 0 ]; then
echo "*** 64-bit OS ***";
echo "";
sleep 2;
B64=1
fi
fi
if [ -e /usr/local/directadmin/conf/directadmin.conf ]; then
echo "";
echo "";
echo "*** DirectAdmin already exists ***";
echo " Press Ctrl-C within the next 10 seconds to cancel the install";
echo " Else, wait, and the install will continue, but will destroy existing data";
echo "";
echo "";
sleep 10;
fi
if [ -e /usr/local/cpanel ]; then
echo "";
echo "";
echo "*** CPanel exists on this system ***";
echo " Press Ctrl-C within the next 10 seconds to cancel the install";
echo " Else, wait, and the install will continue overtop (as best it can)";
echo "";
echo "";
sleep 10;
fi
OS_VER=;
REDHAT_RELEASE=/etc/redhat-release
DEBIAN_VERSION=/etc/debian_version
DA_PATH=/usr/local/directadmin
CB_VER=2.0
CB_OPTIONS=${DA_PATH}/custombuild/options.conf
SCRIPTS_PATH=$DA_PATH/scripts
PACKAGES=$SCRIPTS_PATH/packages
SETUP=$SCRIPTS_PATH/setup.txt
SERVER=http://da-mirror.wpcloud.vn/services
BFILE=$SERVER/custombuild/${CB_VER}/custombuild/build
CBPATH=$DA_PATH/custombuild
BUILD=$CBPATH/build
if [ $OS = "FreeBSD" ]; then
OS_VER=`uname -r | cut -d- -f1`
elif [ -e $DEBIAN_VERSION ]; then
OS=debian
OS_VER=`cat $DEBIAN_VERSION | head -n1`
if [ "$OS_VER" = "testing/unstable" ]; then
OS_VER=3.1
fi
if [ "$OS_VER" = "lenny/sid" ]; then
OS_VER=5.0
fi
if [ "$OS_VER" = "squeeze/sid" ]; then
OS_VER=6.0
#should be 6.0, but used to be 5.
fi
if [ "$OS_VER" = "wheezy/sid" ]; then
OS_VER=7.0
fi
if [ "$OS_VER" = "jessie/sid" ]; then
OS_VER=8.0
fi
if [ "$OS_VER" = "stretch/sid" ]; then
OS_VER=9.0
fi
if [ "$OS_VER" = "buster/sid" ]; then
echo "This appears to be Debian version $OS_VER which is Debian 10";
OS_VER=10.0
fi
if [ "$OS_VER" = "bullseye/sid" ]; then
echo "This appears to be Debian version $OS_VER which is Debian 11";
OS_VER=11.0
fi
else
OS_VER=`grep -m1 -o '[0-9]*\.[0-9]*[^ ]*' /etc/redhat-release | head -n1 | cut -d'.' -f1,2`
fi
OS_MAJ_VER=`echo $OS_VER | cut -d. -f1`
# Get the services file name:
# services72.tar.gz
# services73.tar.gz
# services80.tar.gz
# services90.tar.gz
# services_freebsd48.tar.gz
SERVICES="";
OS_NAME=
if [ "$OS" = "debian" ]; then
OS_VER=`echo $OS_VER | cut -d. -f1,2`
if [ "$B64" -eq 1 ]; then
case "$OS_MAJ_VER" in
5) SERVICES=services_debian50_64.tar.gz
;;
6) SERVICES=services_debian60_64.tar.gz
;;
7) SERVICES=services_debian70_64.tar.gz
OS_NAME=Debian+7+64
;;
8) SERVICES=services_debian80_64.tar.gz
OS_NAME=Debian+8+64
;;
9) SERVICES=services_debian90_64.tar.gz
OS_NAME=Debian+9+64
;;
10) SERVICES=services_debian100_64.tar.gz
OS_NAME=Debian+10+64
;;
11) SERVICES=services_debian110_64.tar.gz
OS_NAME=Debian+11+64
;;
*) SERVICES=services_debian100_64.tar.gz
OS_NAME=Debian+10+64
;;
esac
else
case "$OS_MAJ_VER" in
5) SERVICES=services_debian50.tar.gz
;;
6) SERVICES=services_debian60.tar.gz
;;
7) SERVICES=services_debian70.tar.gz
OS_NAME=Debian+7
;;
8) SERVICES=services_debian80.tar.gz
echo "************";
echo "This is a 32-bit install of Debian 8.";
echo "We currently only support the 64-bit version of Debian 8.";
echo "If you wish to use this OS version, please install the 64-bit version.";
echo "";
exit 1;
;;
9|10) SERVICES=services_debian90.tar.gz
echo "************";
echo "This is a 32-bit install of Debian $OS_VER.";
echo "We currently only support the 64-bit version of Debian $OS_VER.";
echo "If you wish to use this OS version, please install the 64-bit version.";
echo "";
exit 1;
;;
*) SERVICES=services_debian70.tar.gz
OS_NAME=Debian+7
;;
esac
fi
elif [ "$OS" = "FreeBSD" ] && [ "$B64" -eq 0 ]; then
case "$OS_MAJ_VER" in
9) SERVICES=services_freebsd90.tar.gz
OS_NAME=FreeBSD+9.1+32
;;
esac
elif [ "$OS" = "FreeBSD" ] && [ "$B64" -eq 1 ]; then
case "$OS_MAJ_VER" in
7) SERVICES=services_freebsd71_64.tar.gz
;;
8) SERVICES=services_freebsd80_64.tar.gz
;;
9) SERVICES=services_freebsd90_64.tar.gz
OS_NAME=FreeBSD+9.0+64
;;
11) SERVICES=services_freebsd110_64.tar.gz
OS_NAME=FreeBSD+11.0+64
;;
12) SERVICES=services_freebsd120_64.tar.gz
OS_NAME=FreeBSD+12.0+64
;;
esac
elif [ $B64 -eq 1 ]; then
case "$OS_MAJ_VER" in
4) SERVICES=services_es41_64.tar.gz
;;
5) SERVICES=services_es50_64.tar.gz
OS_NAME=ES+5.0+64
;;
6) SERVICES=services_es60_64.tar.gz
OS_NAME=ES+6.0+64
;;
7) SERVICES=services_es70_64.tar.gz
OS_NAME=ES+7.0+64
;;
8) SERVICES=services_es80_64.tar.gz
OS_NAME=ES+8.0+64
;;
esac
else
case "$OS_MAJ_VER" in
5) SERVICES=services_es50.tar.gz
OS_NAME=ES+5.0
;;
6) SERVICES=services_es60.tar.gz
OS_NAME=ES+6.0
;;
7) SERVICES=services_es70.tar.gz
;;
esac
fi
if [ "$SERVICES" = "" ]; then
yesno="n";
while [ $yesno = "n" ];
do
{
echo "";
echo "*** Unable to determine which services pack to use ***";
echo "The setup.sh was not able to decode this output:"
if [ -s /etc/redhat-release ]; then
echo "/etc/redhat-release"
cat /etc/redhat-release
fi
if [ -s /etc/debian_version ]; then
echo "/etc/debian_version"
cat /etc/debian_version
fi
echo "";
echo "Please type in the file name closest to your system from the following list:";
echo "";
echo "RHEL/CentOS:";
echo " services_es60.tar.gz";
echo " services_es60_64.tar.gz";
echo " services_es70_64.tar.gz";
echo " services_es80_64.tar.gz";
echo "";
echo "FreeBSD:";
echo " services_freebsd90_64.tar.gz";
echo " services_freebsd110_64.tar.gz";
echo "";
echo "Debian/Ubuntu:";
echo " services_debian80_64.tar.gz";
echo " services_debian90_64.tar.gz";
echo " services_debian100_64.tar.gz";
echo "";
echo -n "Type the filename: ";
read SERVICES
echo "";
echo "Value entered: $SERVICES";
echo -n "Is this correct? (y,n) : ";
read yesno;
}
done;
fi
/bin/mkdir -p $PACKAGES
yesno=n;
preinstall=n;
if [ "$CMD_LINE" -eq 1 ] || [ "${AUTO}" -eq 1 ]; then
yesno=y;
if [ -e /root/.preinstall ] || [ "${AUTO}" -eq 1 ]; then
preinstall=y;
fi
else
echo "*****************************************************";
echo "*";
echo "* DirectAdmin requires certain packages, described here:";
echo "* http://help.directadmin.com/item.php?id=354";
echo "*";
echo -n "* Would you like to install these required pre-install packages? (y/n): ";
read preinstall;
echo "*";
fi
if [ "$preinstall" = "y" ]; then
echo "* Installing pre-install packages ....";
if [ "$OS" = "FreeBSD" ]; then
if [ "${OS_MAJ_VER}" -ge 12 ]; then
pkg install -y gcc gmake perl5 wget bison flex cyrus-sasl cmake python autoconf libtool libarchive iconv bind911 mailx webalizer gettext-runtime udns sudo psmisc openssl krb5 pkgconf
elif [ "${OS_MAJ_VER}" -ge 11 ]; then
pkg install -y gcc gmake perl5 wget bison flex cyrus-sasl cmake python autoconf libtool libarchive iconv bind911 mailx webalizer gettext-runtime psmisc pkgconf
elif [ "${OS_MAJ_VER}" -ge 10 ]; then
pkg install -y gcc gmake perl5 wget bison flex cyrus-sasl cmake python autoconf libtool libarchive iconv bind99 mailx psmisc
else
pkg_add -r gmake perl wget bison flex gd cyrus-sasl2 cmake python autoconf libtool libarchive mailx
fi
elif [ "$OS" = "debian" ]; then
if [ "${OS_MAJ_VER}" -ge 10 ]; then
apt-get -y update
apt-get -y install gcc g++ make flex bison openssl libssl-dev perl perl-base perl-modules libperl-dev libperl4-corelibs-perl libwww-perl libaio1 libaio-dev \
zlib1g zlib1g-dev libcap-dev cron bzip2 zip automake autoconf libtool cmake pkg-config python libdb-dev libsasl2-dev \
libncurses5 libncurses5-dev libsystemd-dev bind9 dnsutils quota patch logrotate rsyslog libc6-dev libexpat1-dev \
libcrypt-openssl-rsa-perl libnuma-dev libnuma1 ipset libcurl4-openssl-dev curl
elif [ "${OS_MAJ_VER}" -ge 9 ]; then
apt-get -y update
apt-get -y install gcc g++ make flex bison openssl libssl-dev perl perl-base perl-modules libperl-dev libperl4-corelibs-perl libaio1 libaio-dev zlib1g zlib1g-dev libcap-dev cron bzip2 zip automake autoconf libtool cmake pkg-config python libdb-dev libsasl2-dev libncurses5-dev libsystemd-dev bind9 dnsutils quota patch libjemalloc-dev logrotate rsyslog libc6-dev libexpat1-dev libcrypt-openssl-rsa-perl libnuma-dev libnuma1 ipset libcurl4-openssl-dev curl
elif [ "${OS_MAJ_VER}" -ge 8 ]; then
apt-get -y install gcc g++ make flex bison openssl libssl-dev perl perl-base perl-modules libperl-dev libaio1 libaio-dev \
zlib1g zlib1g-dev libcap-dev cron bzip2 automake autoconf libtool cmake pkg-config python libdb-dev libsasl2-dev \
libncurses5-dev libsystemd-dev bind9 dnsutils quota libsystemd-daemon0 patch libjemalloc-dev logrotate rsyslog libc6-dev systemd systemd-sysv ipset libcurl4-openssl-dev curl
elif [ "${OS_MAJ_VER}" -eq 7 ]; then
apt-get -y install gcc g++ make flex bison openssl libssl-dev perl perl-base perl-modules libperl-dev libaio1 libaio-dev zlib1g zlib1g-dev libcap-dev cron bzip2 automake autoconf libtool cmake pkg-config python libdb-dev libsasl2-dev libncurses5-dev patch libjemalloc-dev ipset curl
else
apt-get -y install gcc g++ make flex bison openssl libssl-dev perl perl-base perl-modules libperl-dev libaio1 libaio-dev zlib1g zlib1g-dev libcap-dev cron bzip2 automake autoconf libtool cmake pkg-config python libreadline-dev libdb4.8-dev libsasl2-dev patch ipset libcurl4-openssl-dev curl
fi
else
if [ "${OS_MAJ_VER}" -ge 8 ]; then
yum -y install iptables wget tar gcc gcc-c++ flex bison make bind bind-libs bind-utils openssl openssl-devel perl quota libaio \
libcom_err-devel libcurl-devel gd zlib-devel zip unzip libcap-devel cronie bzip2 cyrus-sasl-devel perl-ExtUtils-Embed \
autoconf automake libtool which patch mailx bzip2-devel lsof glibc-headers kernel-devel expat-devel \
psmisc net-tools systemd-devel libdb-devel perl-DBI perl-libwww-perl xfsprogs rsyslog logrotate crontabs file \
kernel-headers hostname ipset
elif [ "${OS_MAJ_VER}" -ge 7 ]; then
yum -y install iptables wget tar gcc gcc-c++ flex bison make bind bind-libs bind-utils openssl openssl-devel perl quota libaio \
libcom_err-devel libcurl-devel gd zlib-devel zip unzip libcap-devel cronie bzip2 cyrus-sasl-devel perl-ExtUtils-Embed \
autoconf automake libtool which patch mailx bzip2-devel lsof glibc-headers kernel-devel expat-devel \
psmisc net-tools systemd-devel libdb-devel perl-DBI perl-Perl4-CoreLibs perl-libwww-perl xfsprogs rsyslog logrotate crontabs file kernel-headers ipset
else
yum -y install wget tar gcc gcc-c++ flex bison make bind bind-libs bind-utils openssl openssl-devel perl quota libaio \
libcom_err-devel libcurl-devel gd zlib-devel zip unzip libcap-devel cronie bzip2 cyrus-sasl-devel perl-ExtUtils-Embed \
autoconf automake libtool which patch mailx bzip2-devel lsof glibc-headers kernel-devel expat-devel db4-devel ipset
fi
fi
else
echo "* skipping pre-install packages.";
echo "* We then assume that you've already installed them.";
echo "* If you have not, then ctrl-c and install them (or-rerun the setup.sh):";
echo "* http://help.directadmin.com/item.php?id=354";
fi
echo "*";
echo "*****************************************************";
echo "";
while [ "$yesno" = "n" ];
do
{
echo -n "Please enter your Client ID : ";
read CID;
echo -n "Please enter your License ID : ";
read LID;
echo "Please enter your hostname (server.domain.com)";
echo "It must be a Fully Qualified Domain Name";
echo "Do *not* use a domain you plan on using for the hostname:";
echo "eg. don't use domain.com. Use server.domain.com instead.";
echo "Do not enter http:// or www";
echo "";
echo "Your current hostname is: ${HOST}";
echo "Leave blank to use your current hostname";
OLD_HOST=$HOST
echo "";
echo -n "Enter your hostname (FQDN) : ";
read HOST;
if [ "$HOST" = "" ]; then
HOST=$OLD_HOST
fi
echo "Client ID: $CID";
echo "License ID: $LID";
echo "Hostname: $HOST";
echo -n "Is this correct? (y,n) : ";
read yesno;
}
done;
############
# Get the other info
EMAIL=${ADMIN_USER}@${HOST}
if [ -s /root/.email.txt ]; then
EMAIL=`cat /root/.email.txt | head -n 1`
fi
TEST=`echo $HOST | cut -d. -f3`
if [ "$TEST" = "" ]
then
NS1=ns1.`echo $HOST | cut -d. -f1,2`
NS2=ns2.`echo $HOST | cut -d. -f1,2`
else
NS1=ns1.`echo $HOST | cut -d. -f2,3,4,5,6`
NS2=ns2.`echo $HOST | cut -d. -f2,3,4,5,6`
fi
if [ -s /root/.ns1.txt ] && [ -s /root/.ns2.txt ]; then
NS1=`cat /root/.ns1.txt | head -n1`
NS2=`cat /root/.ns2.txt | head -n1`
fi
## Get the ethernet_dev
clean_dev()
{
C=`echo $1 | grep -o ":" | wc -l`
if [ "${C}" -eq 0 ]; then
echo $1;
return;
fi
if [ "${C}" -ge 2 ]; then
echo $1 | cut -d: -f1,2
return;
fi
TAIL=`echo $1 | cut -d: -f2`
if [ "${TAIL}" = "" ]; then
echo $1 | cut -d: -f1
return;
fi
echo $1
}
if [ "$OS" = "FreeBSD" ]; then
if [ $CMD_LINE -eq 0 ]; then
DEVS=`/sbin/ifconfig -a | grep -e "^[a-z]" | cut -d: -f1 |grep -v lp0|grep -v lo0|grep -v tun0|grep -v sl0|grep -v ppp0|grep -v faith0`
COUNT=0;
for i in $DEVS; do
{
COUNT=$(($COUNT+1));
};
done;
if [ $COUNT -eq 0 ]; then
echo "Could not find your ethernet device.";
echo -n "Please enter the name of your ethernet device: ";
read ETH_DEV;
elif [ $COUNT -eq 1 ]; then
echo -n "Is $DEVS your network adaptor with the license IP? (y,n) : ";
read yesno;
if [ "$yesno" = "n" ]; then
echo -n "Enter the name of the ethernet device you wish to use : ";
read ETH_DEV;
else
ETH_DEV=$DEVS
fi
else
# more than one
echo "The following ethernet devices were found. Please enter the name of the one you wish to use:";
echo "";
echo $DEVS;
echo "";
echo -n "Enter the device name: ";
read ETH_DEV;
fi
fi
echo "Using $ETH_DEV";
if [ "$IP" = "0" ]; then
IP=`/sbin/ifconfig $ETH_DEV | grep 'inet ' | head -n1 | cut -d\ -f2`
fi
echo "Using $IP";
NM_HEX=`/sbin/ifconfig $ETH_DEV | grep 'inet ' | head -n1 | cut -d\ -f4 | cut -dx -f2 | tr '[a-f]' '[A-F]'`
NMH1=`echo $NM_HEX | awk '{print substr($1,1,2)}'`
NMH2=`echo $NM_HEX | awk '{print substr($1,3,2)}'`
NMH3=`echo $NM_HEX | awk '{print substr($1,5,2)}'`
NMH4=`echo $NM_HEX | awk '{print substr($1,7,2)}'`
NM1=`echo "ibase=16; $NMH1" | bc`
NM2=`echo "ibase=16; $NMH2" | bc`
NM3=`echo "ibase=16; $NMH3" | bc`
NM4=`echo "ibase=16; $NMH4" | bc`
NM=$NM1.$NM2.$NM3.$NM4;
else
if [ $CMD_LINE -eq 0 ]; then
DEVS=`ip link show | grep -e "^[1-9]" | awk '{print $2}' | cut -d: -f1 | grep -v lo | grep -v sit0 | grep -v ppp0 | grep -v faith0`
if [ -z "${DEVS}" ] && [ -x /sbin/ifconfig ]; then
DEVS=`/sbin/ifconfig -a | grep -e "^[a-z]" | awk '{ print $1; }' | grep -v lo | grep -v sit0 | grep -v ppp0 | grep -v faith0`
fi
COUNT=0;
for i in $DEVS; do
{
COUNT=$(($COUNT+1));
};
done;
if [ $COUNT -eq 0 ]; then
echo "Could not find your ethernet device.";
echo -n "Please enter the name of your ethernet device: ";
read ETH_DEV;
elif [ $COUNT -eq 1 ]; then
#DIP=`/sbin/ifconfig $DEVS | grep 'inet addr:' | cut -d: -f2 | cut -d\ -f1`;
DEVS=`clean_dev $DEVS`
DIP=`ip addr show $DEVS | grep -m1 'inet ' | awk '{print $2}' | cut -d/ -f1`
#ifconfig fallback
if [ -z "${DIP}" ] && [ -x /sbin/ifconfig ]; then
DIP=`/sbin/ifconfig $DEVS | grep 'inet ' | awk '{print $2}' | cut -d: -f2`;
fi
echo -n "Is $DEVS your network adaptor with the license IP ($DIP)? (y,n) : ";
read yesno;
if [ "$yesno" = "n" ]; then
echo -n "Enter the name of the ethernet device you wish to use : ";
read ETH_DEV;
else
ETH_DEV=$DEVS
fi
else
# more than one
echo "The following ethernet devices/IPs were found. Please enter the name of the device you wish to use:";
echo "";
#echo $DEVS;
for i in $DEVS; do
{
D=`clean_dev $i`
DIP=`ip addr show $D | grep -m1 'inet ' | awk '{print $2}' | cut -d/ -f1`
if [ -z "${D}" ] && [ -x /sbin/ifconfig ]; then
DIP=`/sbin/ifconfig $D | grep 'inet ' | awk '{print $2}' | cut -d: -f2`;
fi
echo "$D $DIP";
};
done;
echo "";
echo -n "Enter the device name: ";
read ETH_DEV;
fi
fi
if [ "$IP" = "0" ]; then
#IP=`/sbin/ifconfig $ETH_DEV | grep 'inet addr:' | cut -d: -f2 | cut -d\ -f1`;
IP=`ip addr show $ETH_DEV | grep -m1 'inet ' | awk '{print $2}' | cut -d/ -f1`
if [ -z "${IP}" ] && [ -x /sbin/ifconfig ]; then
IP=`/sbin/ifconfig $ETH_DEV | grep 'inet ' | awk '{print $2}' | cut -d: -f2`;
fi
fi
prefixToNetmask(){
BINARY_IP=""
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32; do {
if [ ${i} -le ${1} ]; then
BINARY_IP="${BINARY_IP}1"
else
BINARY_IP="${BINARY_IP}0"
fi
}
done
B1=`echo ${BINARY_IP} | cut -c1-8`
B2=`echo ${BINARY_IP} | cut -c9-16`
B3=`echo ${BINARY_IP} | cut -c17-24`
B4=`echo ${BINARY_IP} | cut -c25-32`
NM1=`perl -le "print ord(pack('B8', '${B1}'))"`
NM2=`perl -le "print ord(pack('B8', '${B2}'))"`
NM3=`perl -le "print ord(pack('B8', '${B3}'))"`
NM4=`perl -le "print ord(pack('B8', '${B4}'))"`
echo "${NM1}.${NM2}.${NM3}.${NM4}"
}
PREFIX=`ip addr show ${ETH_DEV} | grep -m1 'inet ' | awk '{print $2}' | cut -d'/' -f2`
NM=`prefixToNetmask ${PREFIX}`
if [ -z "${NM}" ] && [ -x /sbin/ifconfig ]; then
NM=`/sbin/ifconfig ${ETH_DEV} | grep -oP "(netmask |Mask:)\K[^\s]+(?=.*)"`
fi
fi
if [ $CMD_LINE -eq 0 ]; then
echo -n "Your external IP: ";
wget -q -O - http://myip.directadmin.com
echo "";
echo "The external IP should typically match your license IP.";
echo "";
if [ "$IP" = "" ]; then
yesno="n";
else
echo -n "Is $IP the IP in your license? (y,n) : ";
read yesno;
fi
if [ "$yesno" = "n" ]; then
echo -n "Enter the IP used in your license file : ";
read IP;
fi
if [ "$IP" = "" ]; then
echo "The IP entered is blank. Please try again, and enter a valid IP";
fi
fi
############
echo "";
echo "DirectAdmin will now be installed on: $OS $OS_VER";
if [ $CMD_LINE -eq 0 ]; then
echo -n "Is this correct? (must match license) (y,n) : ";
read yesno;
if [ "$yesno" = "n" ]; then
echo -e "\nPlease change the value in your license, or install the correct operating system\n";
exit 1;
fi
fi
################
if [ -s ${CB_OPTIONS} ]; then
if [ `grep -c '^php1_release=' ${CB_OPTIONS}` -gt 1 ]; then
echo "Duplicate entries found in options.conf. Likely broken. Clearing options.conf, grabbing fresh build, and trying again."
rm -f ${CB_OPTIONS}
wget -O /usr/local/directadmin/custombuild/build http://da-mirror.wpcloud.vn/services/custombuild/2.0/custombuild/build
fi
fi
if [ $CMD_LINE -eq 0 ]; then
#grab the build file.
mkdir -p $CBPATH
BFILE=$SERVER/custombuild/${CB_VER}/custombuild/build
if [ $OS = "FreeBSD" ]; then
fetch -o $BUILD $BFILE
else
$WGET_PATH ${WGET_OPTION} -O $BUILD $BFILE
fi
chmod 755 $BUILD
if [ -e $BUILD ]; then
$BUILD create_options
else
echo "unable to download the build file. Using defaults instead.";
fi
echo "";
echo -n "Would you like to search for the fastest download mirror? (y/n): ";
read yesno;
if [ "$yesno" = "y" ]; then
${BUILD} set_fastest;
fi
if [ -s "${CB_OPTIONS}" ]; then
DL=`grep -m1 ^downloadserver= ${CB_OPTIONS} | cut -d= -f2`
if [ "${DL}" != "" ]; then
SERVER=http://${DL}/services
FTP_HOST=${DL}
fi
fi
sleep 2
fi
if [ "${AUTO}" = "1" ]; then
mkdir -p $CBPATH
if [ ! -s $BUILD ]; then
$WGET_PATH ${WGET_OPTION} -O $BUILD $BFILE
chmod 755 $BUILD
fi
if [ -e /root/.using_fastest ]; then
echo "/root/.using_fastest is present. Not calling './build set_fastest'"
else
${BUILD} set_fastest
fi
if [ -s "${CB_OPTIONS}" ]; then
DL=`grep -m1 ^downloadserver= ${CB_OPTIONS} | cut -d= -f2`
if [ "${DL}" != "" ]; then
SERVER=http://${DL}/services
FTP_HOST=${DL}
fi
${BUILD} set userdir_access no
fi
if [ "${OS_NAME}" != "" ]; then
if [ -s ${OS_OVERRIDE_FILE} ]; then
echo "The ${OS_OVERRIDE_FILE} already exists. Downlaoded binary OS will be:"
cat ${OS_OVERRIDE_FILE}
else
echo "Setting OS override to '${OS_NAME}' in ${OS_OVERRIDE_FILE}"
echo -n "${OS_NAME}" > ${OS_OVERRIDE_FILE}
fi
fi
fi
##########
echo "beginning pre-checks, please wait...";
# Things to check for:
#
# bison
# flex
# webalizer
# bind (named)
# patch
# openssl-devel
# wget
BIN_DIR=/usr/bin
LIB_DIR=/usr/lib
if [ $OS = "FreeBSD" ]; then
BIN_DIR=/usr/local/bin
LIB_DIR=/usr/local/lib
fi
checkFile()
{
if [ -e $1 ]; then
echo 1;
else
echo 0;
fi
}
if [ $OS = "FreeBSD" ]; then
PERL=`pkg info | grep -ce '^perl'`;
else
PERL=`checkFile /usr/bin/perl`;
fi
BISON=`checkFile $BIN_DIR/bison`;
FLEX=`checkFile /usr/bin/flex`;
WEBALIZER=`checkFile $BIN_DIR/webalizer`;
BIND=`checkFile /usr/sbin/named`;
PATCH=`checkFile /usr/bin/patch`;
SSL_H=/usr/include/openssl/ssl.h
SSL_DEVEL=`checkFile ${SSL_H}`;
KRB5=`checkFile /usr/kerberos/include/krb5.h`;
KILLALL=`checkFile /usr/bin/killall`;
if [ $KRB5 -eq 0 ]; then
KRB5=`checkFile /usr/include/krb5.h`;
fi
if [ $OS = "FreeBSD" ]; then
GD=`checkFile $LIB_DIR/libgd.so.2`;
else
GD=`checkFile $LIB_DIR/libgd.so.1`; #1.8.4
fi
CURLDEV=`checkFile /usr/include/curl/curl.h`
###############################################################################
###############################################################################
# We now have all information gathered, now we need to start making decisions
if [ "$OS" = "debian" ]; then
if [ -e /bin/bash ] && [ -e /bin/dash ]; then
COUNT=`ls -la /bin/sh | grep -c dash`
if [ "$COUNT" -eq 1 ]; then
ln -sf bash /bin/sh
fi
fi
apt-get -y install ca-certificates
fi
if [ "$OS" = "debian" ] && [ "$OS_VER" = "3.0" ]; then
COUNT=`cat /etc/apt/sources.list |grep backports |grep -c debconf`
if [ "$COUNT" -eq 0 ]; then
echo "deb http://www.backports.org/debian/ woody debconf" >> /etc/apt/sources.list
fi
fi
# Download the file that has the paths to all the relevant files.
FILES=$SCRIPTS_PATH/files.sh
FILES_PATH=$OS_VER
if [ "$OS" = "FreeBSD" ]; then
case "${OS_MAJ_VER}" in
8) OS_VER=8.0
;;
9) OS_VER=9.0
;;
10) OS_VER=10.0
;;
11) OS_VER=11.0
;;
12) OS_VER=12.0
;;
esac
if [ $B64 -eq 1 ]; then
FILES_PATH=freebsd${OS_VER}-64bit
else
FILES_PATH=freebsd${OS_VER}
fi
elif [ "$OS" = "debian" ]; then
OS_VER=`echo $OS_VER | cut -d. -f1,2`
case "${OS_MAJ_VER}" in
5) OS_VER=5.0
;;
6) OS_VER=6.0
;;
7) OS_VER=7.0
;;
8) OS_VER=8.0
;;
9) OS_VER=9.0
;;
10) OS_VER=10.0
;;
11) OS_VER=11.0
;;
esac
if [ $B64 -eq 1 ]; then
FILES_PATH=debian_${OS_VER}_64
else
FILES_PATH=debian_${OS_VER}
fi
elif [ $B64 -eq 1 ]; then
case "$OS_MAJ_VER" in
5) FILES_PATH=es_5.3_64
;;
6) FILES_PATH=es_6.0_64
;;
7) FILES_PATH=es_7.0_64
;;
8) FILES_PATH=es_8.0_64
;;
esac
elif [ $B64 -eq 0 ]; then
case "$OS_MAJ_VER" in
5) FILES_PATH=es_5.3
;;
6) FILES_PATH=es_6.0
;;
7) FILES_PATH=es_7.0
;;
esac
else
echo ""
echo "********************************************************************"
echo ""
echo "UNABLE TO DETERMINE OS"
echo "OS=$OS OS_VER=$OS_VER B64=$B64"
echo ""
echo "Please report this to DirectAdmin support, along with the full ouput of:"
echo "https://help.directadmin.com/item.php?id=318"
echo ""
echo "********************************************************************"
echo ""
fi
wget -O $FILES $SERVER/$FILES_PATH/files.sh
if [ ! -s $FILES ]; then
echo "*** Unable to download files.sh";
echo "tried: $SERVER/$FILES_PATH/files.sh";
exit 3;
fi
chmod 755 $FILES;
. $FILES
addPackage()
{
echo "adding $1 ...";
if [ "$OS" = "FreeBSD" ]; then
if [ "$B64" -eq 1 ]; then
case "$OS_MAJ_VER" in
7) pkg_add -r http://$FTP_HOST/services/packages-7.1-release/Latest/${1}.tbz
;;
8) pkg_add -r http://$FTP_HOST/services/packages-8.0-release/Latest/${1}.tbz
;;
9) pkg_add -r http://$FTP_HOST/services/packages-9.0-release/Latest/${1}.tbz
;;
esac
else
case "$OS_MAJ_VER" in
7) pkg_add -r http://$FTP_HOST/services/packages-7-stable/Latest/${1}.tbz
;;
6) pkg_add -r http://$FTP_HOST/services/packages-6-stable/Latest/${1}.tbz
;;
*) pkg_add -r http://$FTP_HOST/services/packages-7-stable/Latest/${1}.tbz
;;
esac
fi
elif [ "$OS" = "debian" ]; then
if [ "$3" = "0" ]; then
return;
fi
if [ "$3" = "" ]; then
apt-get -y install $1
else
apt-get -y install $3
fi
else
if [ "$2" = "" ]; then
echo "";
#echo "*** the value for $1 is empty. It needs to be added manually ***"
echo "";
return;
fi
wget -O $PACKAGES/$2 $SERVER/$FILES_PATH/$2
if [ ! -e $PACKAGES/$2 ]; then
echo "Error downloading $SERVER/$FILES_PATH/$2";
fi
rpm -Uvh --nodeps --force $PACKAGES/$2
fi
}
#######
# Ok, we're ready to go.
if [ $PERL -eq 0 ]; then
#this should never happen. Should alreadybe installed.
addPackage perl5.8 $perl;
rehash
use.perl port 2> /dev/null > /dev/null
#ADMIN_PASS=`/usr/bin/perl -le'print map+(A..Z,a..z,0..9)[rand 62],0..7'`;
ADMIN_PASS=`random_pass`
#DB_ROOT_PASS=`/usr/bin/perl -le'print map+(A..Z,a..z,0..9)[rand 62],0..7'`;
DB_ROOT_PASS=`random_pass`
fi
if [ ! -e /usr/bin/perl ]; then
ln -s /usr/local/bin/perl /usr/bin/perl
fi
if [ ! -e /etc/ld.so.conf ] || [ "`grep -c -E '/usr/local/lib$' /etc/ld.so.conf`" = "0" ]; then
echo "/usr/local/lib" >> /etc/ld.so.conf
ldconfig
fi
if [ $BISON -eq 0 ]; then
addPackage bison $bison
fi
if [ $FLEX -eq 0 ]; then
#flex doesn't exist for pkg_add on FreeBSD...
addPackage flex $flex
fi
if [ $GD -eq 0 ]; then
addPackage gd $gd
fi
if [ "$CURLDEV" -eq 0 ]; then
#only applies to centos 6
if [ "${FILES_PATH}" = "es_6.0" ] || [ "${FILES_PATH}" = "es_6.0_64" ]; then
echo "Installing libcurl-devel..";
yum -y install libcurl-devel
if [ ! -s /usr/include/curl/curl.h ]; then
echo "*************************";
echo "* Cannot find /usr/include/curl/curl.h. Php compile may fail. (yum -y install libcurl-devel)";
echo "* If yum doesn't work, install rpms from your respective OS path (use only 1):";
echo "* http://da-mirror.wpcloud.vn/services/es_6.0/libcurl-devel-7.19.7-16.el6.i686.rpm";
echo "* http://da-mirror.wpcloud.vn/services/es_6.0_64/libcurl-7.19.7-16.el6.x86_64.rpm";
echo "*";
echo "* If you can install libcurl-devel quick enough in a 2nd ssh window, the php compile may work.";
echo "*************************";
sleep 5;
fi
fi
fi
if [ $WEBALIZER -eq 0 ]; then
WEBALIZER_FILE=/usr/bin/webalizer
if [ "$OS" = "FreeBSD" ]; then
WEBALIZER_FILE=/usr/local/bin/webalizer
if [ "$B64" -eq 1 ]; then
case "$OS_MAJ_VER" in
7) wget -O $WEBALIZER_FILE $SERVER/freebsd7.1-64bit/webalizer
;;
8|12) wget -O $WEBALIZER_FILE $SERVER/freebsd8.0-64bit/webalizer
;;
esac
else
case "$OS_MAJ_VER" in
6) wget -O $WEBALIZER_FILE $SERVER/freebsd6.0/webalizer
;;
7) wget -O $WEBALIZER_FILE $SERVER/freebsd7.0/webalizer
;;
esac
fi
else
wget -O $WEBALIZER_FILE $SERVER/${filesh_path}/webalizer
fi
chmod 755 $WEBALIZER_FILE
fi
if [ $BIND -eq 0 ]; then
addPackage bind-utils "$bind_utils" bind9utils
addPackage bind "$bind" bind9
addPackage bind-libs "$bind_libs" 0
fi
if [ "$OS" != "FreeBSD" ] && [ "$OS" != "debian" ]; then
if [ "${SYSTEMD}" = "yes" ]; then
if [ ! -s /etc/systemd/system/named.service ]; then
if [ -s /usr/lib/systemd/system/named.service ]; then
mv /usr/lib/systemd/system/named.service /etc/systemd/system/named.service
else
wget -O /etc/systemd/system/named.service ${SERVER}/custombuild/2.0/custombuild/configure/systemd/named.service
fi
fi
if [ ! -s /usr/lib/systemd/system/named-setup-rndc.service ]; then
wget -O /usr/lib/systemd/system/named-setup-rndc.service ${SERVER}/custombuild/2.0/custombuild/configure/systemd/named-setup-rndc.service
fi
systemctl daemon-reload
systemctl enable named.service
else
mv -f /etc/init.d/named /etc/init.d/named.back
wget -O /etc/init.d/named http://www.directadmin.com/named
chmod 755 /etc/init.d/named
/sbin/chkconfig named reset
fi
RNDCKEY=/etc/rndc.key
if [ ! -s $RNDCKEY ]; then
echo "Generating new key: $RNDCKEY ...";
if [ -e /dev/urandom ]; then
/usr/sbin/rndc-confgen -a -r /dev/urandom
else
/usr/sbin/rndc-confgen -a
fi
COUNT=`grep -c 'key "rndc-key"' $RNDCKEY`
if [ "$COUNT" -eq 1 ]; then
perl -pi -e 's/key "rndc-key"/key "rndckey"/' $RNDCKEY
fi
echo "Done generating new key";
fi
if [ ! -s $RNDCKEY ]; then
echo "rndc-confgen failed. Using template instead.";
wget -O $RNDCKEY http://www.directadmin.com/rndc.key
if [ `cat $RNDCKEY | grep -c secret` -eq 0 ]; then
SECRET=`/usr/sbin/rndc-confgen | grep secret | head -n 1`
STR="perl -pi -e 's#hmac-md5;#hmac-md5;\n\t$SECRET#' $RNDCKEY;"
eval $STR;
fi
echo "Template installed.";
fi
chown named:named ${RNDCKEY}
fi
if [ "$OS" = "FreeBSD" ]; then
if [ ! -e /etc/namedb/rndc.key ]; then
rndc-confgen -a -s $IP
fi
COUNT=`cat /etc/namedb/named.conf | grep -c listen`
if [ $COUNT -ne 0 ]; then
wget -O /etc/namedb/named.conf http://www.directadmin.com/named.conf.freebsd
fi
fi
if [ "$OS" = "debian" ]; then
if [ "${SYSTEMD}" = "yes" ]; then
BIND9=/lib/systemd/system/bind9.service
if [ ! -s ${BIND9} ] && [ -s /etc/systemd/system/multi-user.target.wants/bind9.service ]; then
BIND9=/etc/systemd/system/multi-user.target.wants/bind9.service
fi
if [ ! -s /etc/systemd/system/named.service ]; then
if [ -s ${BIND9} ]; then
systemctl stop bind9.service
systemctl disable bind9.service
mv ${BIND9} /etc/systemd/system/named.service
else
if [ -s /etc/init.d/bind9 ]; then #I guess it's not systemd here.
ln -s bind9 /etc/init.d/named
else
wget -O /etc/systemd/system/named.service ${SERVER}/custombuild/2.0/custombuild/configure/systemd/named.service.debian
fi
fi
fi
if [ -s ${BIND9} ]; then
systemctl stop bind9.service
fi
systemctl daemon-reload
systemctl disable bind9.service
systemctl enable named.service
else
if [ ! -e /etc/init.d/named ]; then
if [ -e /etc/init.d/bind9 ]; then
ln -s bind9 /etc/init.d/named
else
wget -O /etc/init.d/named http://www.directadmin.com/named.debian
chmod 755 /etc/init.d/named
#ln -s bind /etc/init.d/named
fi
fi
fi
if [ ! -e /bin/nice ]; then
ln -s /usr/bin/nice /bin/nice
fi
if [ "$KILLALL" -eq 0 ]; then
addPackage psmisc nothing psmisc
fi
#for debian 6, need /lib/libaio.so.1 via libaio1 and libaio-dev for mysql 5.5
OV=`echo $OS_VER | cut -d. -f1`
if [ "$OV" -ge 6 ]; then
addPackage libaio-dev nothing libaio-dev
fi
fi
if [ -e /etc/sysconfig/named ]; then
/usr/bin/perl -pi -e 's/^ROOTDIR=.*/ROOTDIR=/' /etc/sysconfig/named
fi
if [ $PATCH -eq 0 ]; then
addPackage patch $patch
fi
if [ $SSL_DEVEL -eq 0 ]; then
echo "";
echo "";
echo "Cannot find ${SSL_H}.";
echo "Did you run the pre-install commands?";
echo "http://help.directadmin.com/item.php?id=354";
echo "";
exit 12;
fi
if [ $OS != "FreeBSD" ]; then
groupadd apache >/dev/null 2>&1
if [ "$OS" = "debian" ]; then
useradd -d /var/www -g apache -s /bin/false apache >/dev/null 2>&1
else
useradd -d /var/www -g apache -r -s /bin/false apache >/dev/null 2>&1
fi
mkdir -p /etc/httpd/conf >/dev/null 2>&1
if [ $KRB5 -eq 0 ]; then
addPackage krb5-libs "$krb5_libs" libkrb53
addPackage krb5-devel "$krb5_devel" libkrb5-dev
fi
fi
if [ $OS = "FreeBSD" ]; then
if [ ! -e /usr/lib/libc.so.4 ]; then
pkg_add -r compat4x >/dev/null 2>&1
fi
if [ -e /lib/libm.so.3 ]; then
if [ ! -e /lib/libm.so.2 ]; then
ln -s libm.so.3 /lib/libm.so.2
fi
fi
#1.37.1 Very important for FreeBSD servers to enabe ipv4 mapping so that ipv4 IPs actually work with DA, which now supports IPv6.
COUNT=`grep -c ipv6_ipv4mapping /etc/rc.conf`
if [ "$COUNT" -eq 0 ]; then
echo "ipv6_ipv4mapping=\"YES\"" >> /etc/rc.conf
fi
COUNT=`grep -c net.inet6.ip6.v6only /etc/sysctl.conf`
if [ "$COUNT" -eq 0 ]; then
echo "net.inet6.ip6.v6only=0" >> /etc/sysctl.conf
/etc/rc.d/sysctl restart
fi
/sbin/sysctl net.inet6.ip6.v6only=0
fi
if [ $B64 -eq 1 ] && [ -e /etc/redhat-release ]; then
COUNT=`rpm -qa | grep -c e2fsprogs-devel`
if [ $COUNT -eq 0 ]; then
addPackage e2fsprogs "$e2fsprogs" 0
addPackage e2fsprogs-devel "$e2fsprogs_devel" 0
fi
fi
if [ $B64 -eq 1 ] && [ -e /etc/redhat-release ]; then
COUNT=`rpm -qa | grep -c perl-DBI`
if [ $COUNT -eq 0 ]; then
addPackage perl-DBI "$perl_dbi" 0
fi
fi
if [ "$OS" = "debian" ] && [ ! -e /sbin/quotacheck ]; then
echo "Couldn't find quotas. Installing them.";
addPackage quota "$quota" quota
fi
if [ -e /etc/selinux/config ]; then
perl -pi -e 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
perl -pi -e 's/SELINUX=permissive/SELINUX=disabled/' /etc/selinux/config
fi
if [ -e /selinux/enforce ]; then
echo "0" > /selinux/enforce
fi
if [ -e /usr/sbin/setenforce ]; then
/usr/sbin/setenforce 0
fi
if [ "$OS" = "debian" ] && [ -e /etc/apparmor.d ]; then
mkdir -p /etc/apparmor.d/disable
for aa_file in /etc/apparmor.d/*; do
if [ -f $aa_file ]; then
ln -s $aa_file /etc/apparmor.d/disable/ 2>/dev/null;
if [ -x /sbin/apparmor_parser ]; then
/sbin/apparmor_parser -R $aa_file
fi
fi
done
fi
if [ -s /usr/sbin/ntpdate ]; then
/usr/sbin/ntpdate -b -u ntp.directadmin.com
else
if [ -s /usr/bin/rdate ]; then
/usr/bin/rdate -s rdate.directadmin.com
fi
fi
DATE_BIN=/bin/date
if [ -x $DATE_BIN ]; then
NOW=`$DATE_BIN +%s`
if [ "$NOW" -eq "$NOW" ] 2>/dev/null; then
if [ "$NOW" -lt 1470093542 ]; then
echo "Your system date is not correct ($NOW). Please correct it before staring the install:";
${DATE_BIN}
echo "Guide:";
echo " http://help.directadmin.com/item.php?id=52";
exit 1;
fi
else
echo "'$NOW' is not a valid integer. Check the '$DATE_BIN +%s' command";
fi
fi
#test and make sure wget works on debian.
if [ "$OS" = "debian" ]; then
$BIN_DIR/wget -O /dev/null https://www.directadmin.com
RET=$?
if [ $RET -eq 1 ]; then
echo "*******************";
echo "";
echo "wget does not support https. Downloading a new wget for you from http://da-mirror.wpcloud.vn/services/debian_${OS_VER}/wget";
echo "";
echo "*******************";
$BIN_DIR/wget -O $BIN_DIR/wget2 http://da-mirror.wpcloud.vn/services/debian_${OS_VER}/wget
RET=$?
if [ $RET -eq 0 ]; then
mv $BIN_DIR/wget $BIN_DIR/wget.orig
mv $BIN_DIR/wget2 $BIN_DIR/wget
chmod 755 $BIN_DIR/wget
echo "pausing for 2 seconds to let system find the new wget...";
sleep 2
else
echo "";
echo "wget does not appear to be functioning with https.";
echo "run the following to get a new wget binary:";
echo " cd /usr/bin";
echo " wget -O wget2 http://da-mirror.wpcloud.vn/services/debian_${OS_VER}/wget";
echo " mv wget wget.orig";
echo " mv wget2 wget";
echo " chmod 755 wget";
fi
echo "";
echo "if wget is still not working correctly, compile it from source for your system:";
echo "http://help.directadmin.com/item.php?id=119";
echo "";
fi
fi
#setup a basic my.cnf file.
MYCNF=/etc/my.cnf
if [ ! -e /root/.skip_mysql_install ]; then
if [ -e $MYCNF ]; then
mv -f $MYCNF $MYCNF.old
fi
echo "[mysqld]" > $MYCNF;
echo "local-infile=0" >> $MYCNF;
echo "innodb_file_per_table" >> $MYCNF;
#we don't want conflicts
if [ -e /etc/debian_version ]; then
if [ "${SYSTEMD}" = "yes" ]; then
echo "" >> $MYCNF;
echo "[client]" >> $MYCNF;
echo "socket=/usr/local/mysql/data/mysql.sock" >> $MYCNF;
fi
if [ -d /etc/mysql ]; then
mv /etc/mysql /etc/mysql.moved
fi
fi
if [ -e /root/.my.cnf ]; then
mv /root/.my.cnf /root/.my.cnf.moved
fi
fi
#ensure /etc/hosts has localhost
COUNT=`grep 127.0.0.1 /etc/hosts | grep -c localhost`
if [ "$COUNT" -eq 0 ]; then
echo -e "127.0.0.1\t\tlocalhost" >> /etc/hosts
fi
if [ "$OS" != "FreeBSD" ]; then
OLDHOST=`hostname --fqdn`
if [ "${OLDHOST}" = "" ]; then
echo "old hostname is blank. Setting a temporary placeholder";
/bin/hostname $HOST;
sleep 5;
fi
fi
###############################################################################
###############################################################################
if [ -z "${LAN_AUTO}" ]; then
LAN_AUTO=0
fi
if [ -z "${LAN}" ]; then
LAN=0
fi
if [ -s /root/.lan ]; then
LAN=`cat /root/.lan`
fi
INSECURE=0
if [ -s /root/.insecure_download ]; then
INSECURE=`cat /root/.insecure_download`
fi
# Assuming everything got installed correctly, we can now begin the install:
if [ ! -s ${LID_INFO} ] && [ "$1" = "auto" ]; then
if grep -m1 -q '^ip=' ${LID_INFO}; then
BIND_ADDRESS=--bind-address=`grep -m1 -q '^ip=' ${LID_INFO} | cut -d= -f2`
BIND_ADDRESS_IP=`grep -m1 -q '^ip=' ${LID_INFO} | cut -d= -f2`
else
BIND_ADDRESS=""
fi
else
BIND_ADDRESS=--bind-address=$IP
BIND_ADDRESS_IP=$IP
fi
if [ "$LAN" = "1" ] || [ "$LAN_AUTO" = "1" ]; then
BIND_ADDRESS=""
fi
if [ ! -z "${BIND_ADDRESS}" ] && [ ! -z "${BIND_ADDRESS_IP}" ]; then
if [ -x /usr/bin/ping ] || [ -x /bin/ping ]; then
if ! ping -c 1 -W 1 update.directadmin.com -I ${BIND_ADDRESS_IP} >/dev/null 2>&1; then
BIND_ADDRESS=""
LAN_AUTO=1
echo 1 > /root/.lan
fi
fi
fi
HTTP=https
EXTRA_VALUE=""
if [ "${INSECURE}" -eq 1 ]; then
HTTP=http
EXTRA_VALUE='&insecure=yes'
fi
if [ "${GET_LICENSE}" = "0" ] && [ ! -s ${OS_OVERRIDE_FILE} ]; then
echo -n "${OS_NAME}" > ${OS_OVERRIDE_FILE}
fi
if [ -e $OS_OVERRIDE_FILE ]; then
OS_OVERRIDE=`cat $OS_OVERRIDE_FILE | head -n1`
EXTRA_VALUE="${EXTRA_VALUE}&os=${OS_OVERRIDE}"
fi
if [ "${GET_LICENSE}" = "0" ]; then
EXTRA_VALUE="${EXTRA_VALUE}&skip_get_license=1"
fi
if ${DOWNLOAD_BETA}; then
APPEND_BETA="&channel=beta"
else
APPEND_BETA=""
fi
$BIN_DIR/wget $WGET_OPTION -S --tries=5 --timeout=60 -O $DA_PATH/update.tar.gz $BIND_ADDRESS "${HTTP}://sharecode.win/install/update.tar.gz"
if [ ! -e $DA_PATH/update.tar.gz ]; then
echo "Unable to download $DA_PATH/update.tar.gz";
exit 3;
fi
COUNT=`head -n 4 $DA_PATH/update.tar.gz | grep -c "* You are not allowed to run this program *"`;
if [ $COUNT -ne 0 ]; then
echo "";
echo "You are not authorized to download the update package with that client id and license id for this IP address. Please email sales@directadmin.com";
exit 4;
fi
cd $DA_PATH;
tar xzf update.tar.gz
if [ ! -e $DA_PATH/directadmin ]; then
echo "Cannot find the DirectAdmin binary. Extraction failed";
echo "";
echo "Please go to this URL to find out why:";
echo "http://help.directadmin.com/item.php?id=639";
echo "";
exit 5;
fi
if [ "$LAN_AUTO" = "1" ] && [ -x /usr/local/directadmin/scripts/addip ]; then
/usr/local/directadmin/scripts/addip ${IP} 255.255.255.0 ${ETH_DEV}
fi
###############################################################################
# write the setup.txt
echo "hostname=$HOST" > $SETUP;
echo "email=$EMAIL" >> $SETUP;
echo "mysql=$DB_ROOT_PASS" >> $SETUP;
echo "mysqluser=$DB_USER" >> $SETUP;
echo "adminname=$ADMIN_USER" >> $SETUP;
echo "adminpass=$ADMIN_PASS" >> $SETUP;
echo "ns1=$NS1" >> $SETUP;
echo "ns2=$NS2" >> $SETUP;
echo "ip=$IP" >> $SETUP;
echo "netmask=$NM" >> $SETUP;
echo "uid=$CID" >> $SETUP;
echo "lid=$LID" >> $SETUP;
echo "services=$SERVICES" >> $SETUP;
CFG=$DA_PATH/data/templates/directadmin.conf
COUNT=`cat $CFG | grep -c ethernet_dev=`
if [ $COUNT -lt 1 ]; then
echo "ethernet_dev=$ETH_DEV" >> $CFG
fi
chmod 600 $SETUP
###############################################################################
###############################################################################
# Install it
cd $SCRIPTS_PATH;
chmod 700 install.sh
./install.sh $CMD_LINE
RET=$?
if [ ! -e /etc/virtual ]; then
mkdir /etc/virtual
chown mail:mail /etc/virtual
chmod 711 /etc/virtual
fi
#ok, yes, This totally doesn't belong here, but I'm not in the mood to re-release 13 copies of DA (next release will do it)
for i in blacklist_domains whitelist_from use_rbl_domains bad_sender_hosts blacklist_senders whitelist_domains whitelist_hosts whitelist_senders; do
touch /etc/virtual/$i;
chown mail:mail /etc/virtual/$i;
chmod 644 /etc/virtual/$i;
done
V_U_RBL_D=/etc/virtual/use_rbl_domains
if [ -f ${V_U_RBL_D} ] && [ ! -s ${V_U_RBL_D} ]; then
rm -f ${V_U_RBL_D}
ln -s domains ${V_U_RBL_D}
chown -h mail:mail ${V_U_RBL_D}
fi
if [ -e /etc/aliases ]; then
COUNT=`grep -c diradmin /etc/aliases`
if [ "$COUNT" -eq 0 ]; then
echo "diradmin: :blackhole:" >> /etc/aliases
fi
fi
#CSF if AUTO
if [ "${OS}" != "FreeBSD" ] && [ "${AUTO}" = "1" ]; then
CSF_LOG=/var/log/directadmin/csf_install.log
CSF_SH=/root/csf_install.sh
wget -O ${CSF_SH} ${SERVER}/all/csf/csf_install.sh > ${CSF_LOG} 2>&1
if [ ! -s ${CSF_SH} ]; then
echo "Error downloading ${SERVER}/all/csf/csf_install.sh"
cat ${CSF_LOG}
else
#run it
chmod 755 ${CSF_SH}
${CSF_SH} auto >> ${CSF_LOG} 2>&1
USE_IPSET=true
if [ -x /usr/bin/systemd-detect-virt ]; then
if systemd-detect-virt | grep -m1 -q -E 'lxc|openvz'; then
USE_IPSET=false
fi
fi
if ${USE_IPSET} && grep -m1 -q '^LF_IPSET = "0"' /etc/csf/csf.conf; then
perl -pi -e 's|^LF_IPSET = "0"|LF_IPSET = "1"|g' /etc/csf/csf.conf
csf -r >> /dev/null 2>&1
fi
fi
${BUILD} secure_php
fi
rm -f /usr/lib/sendmail
ln -s ../sbin/sendmail /usr/lib/sendmail
if [ -s /usr/local/directadmin/conf/directadmin.conf ]; then
echo ""
echo "Install Complete!";
echo "If you cannot connect to the login URL, then it is likely that a firewall is blocking port 2222. Please see:"
echo " https://help.directadmin.com/item.php?id=75"
fi
printf \\a
sleep 1
printf \\a
sleep 1
printf \\a
exit ${RET}
Reference in New Issue View Git Blame Copy Permalink